Documentation

TigerzTools Help Center

Setup guides, safety guidance and troubleshooting for every TigerzTools tool, from the team at Tigerzplace that builds them.

FB Auto Poster Install · Usage · Updates · FAQ LIVE License & Billing Activate · Transfer · Refund Account & Dashboard Login · Settings · Downloads

FB Auto Poster (FAP)

v2.2 LIVE

Browser extension for Facebook group automation: complete setup and usage guide.

Installation

FAP is installed as a browser extension from a ZIP file. The download link is in your dashboard and on the FAP page. There is no Chrome Web Store listing yet, so any Store page claiming to be FAP is not ours.

Install from ZIP
  1. Download the FAP ZIP from your dashboard or the FAP page.
  2. Unzip it into a folder you will keep, for example Documents/FAP. Do not delete or move this folder later: the browser loads FAP from it.
  3. Open chrome://extensions (Edge: edge://extensions, Brave: brave://extensions, Opera: opera://extensions).
  4. Turn on Developer mode (top right).
  5. Click Load unpacked and select the unzipped folder, the one that contains manifest.json.
  6. Pin FAP: click the puzzle icon in the toolbar, then the pin next to FB Auto Poster.
  7. Click the FAP icon to open the panel and sign in when it asks.
  8. Copy your Installation ID from the FAP panel. It is the 32-letter ID also shown on the FAP card in chrome://extensions. You enter it once, when you activate your first plan.
Go to dashboard
Updating FAP
  1. When a new version is out, the FAP panel shows a notice. Important updates are required before FAP continues.
  2. Download the new ZIP from your dashboard or the FAP page.
  3. Unzip it into the same folder as your current version and replace the old files.
  4. Open chrome://extensions and click Reload on the FAP card.
  5. Keeping the same folder keeps the same Installation ID, so your license stays active. A new folder creates a new Installation ID.
FAP page
Requirements: a desktop browser based on Chromium: Google Chrome (version 112 or newer), Microsoft Edge, Brave or Opera. FAP is a Manifest V3 extension. It does not work in Firefox or in mobile browsers.

Quick Start

  1. 1

    Open Facebook

    Log in to Facebook in the same browser and open any Facebook group page. FAP detects your groups once the page loads.

  2. 2

    Click the FAP Icon

    Click the FAP icon in your toolbar. If it is hidden, click the puzzle icon and pin FAP for easy access.

  3. 3

    Select Your Groups

    FAP lists the groups you have joined. Tick the ones this campaign should post to, and use the search filter to find specific groups quickly.

  4. 4

    Write Your Post

    Type your post in the text area. Add a link for an automatic preview, attach an image, or add post variations where your plan includes them.

  5. 5

    Configure Settings

    Set your posting delay, turn on safety breaks if your plan includes them, and save the setup with Campaign Saver to reuse it later.

  6. 6

    Start the Campaign

    Click Start Campaign. FAP works through your selected groups one at a time. The live progress bar shows per-group status and success and failure counts.

Feature Reference

Plan badges below come from the current plans. See the FAP plans for full limits.

Pending Detection v2.2+

FAP checks each post after it is submitted. If Facebook holds a post for admin review instead of publishing it, FAP logs it as pending (not success) and moves on to the next group, so your campaign report stays accurate.

Last Visited Tracking v2.2+

Every time a group is posted to successfully, FAP records the time. You can see it in the group list and use it to space out repeat posts to the same groups.

Campaign Saver FROM BASIC

Save your current setup (selected groups, post content, settings) as a named campaign and load it in one click next time.

Post Variations FREEMIUM

Write several versions of your post. FAP picks one per group on each run, so each group gets a slightly different post.

Image Posts FROM BASIC

Attach a single image to your post (JPG, PNG or WebP, up to 10 MB). The image is used for every group in the campaign run.

Safety Breaks FROM PRO

Adds randomized pauses between posts within a minimum and maximum delay you set, so posts go out one at a time at the pace you choose.

Bulk Post Mode FROM BASIC

Run different post content to different sets of groups within one campaign session. Useful for agencies working for several clients or product lines.

Scheduler FROM PRO

Set a date and time for a campaign to start on its own. Your browser must be open at the scheduled time.

Safety Guidelines

These practices help you post responsibly and within Facebook's rules. No tool can guarantee how Facebook responds to an account, so start carefully and stop if Facebook shows a warning.

Use safety breaks Turn on safety breaks if your plan includes them, with at least 30 seconds between posts. Random intervals are better than fixed ones.
Vary your content Use post variations where your plan includes them. Identical content in many groups is a common reason posts get reported or held for review.
Limit daily campaign volume Start with 20 to 50 groups per day and increase gradually over one or two weeks, especially on a new account or a new installation.
Post to relevant groups only Only post where your content is genuinely relevant. Off-topic posts are reported more often.
Monitor pending detection Review your pending groups after each campaign. A high pending rate from a group means its admins review posts closely, so consider removing it from future runs.
Go slowly with very large groups Groups with 100k+ members usually have stricter moderation. Build a good history in mid-size groups first.
Do not run campaigns around the clock Give your account rest periods. One or two campaign windows per day is a sensible pace.

Troubleshooting

Make sure you are on a Facebook page: FAP only works on facebook.com. Refresh the Facebook tab and open the FAP panel again.
FAP reads your groups from the Facebook sidebar. Make sure you are logged in and have joined at least one group. Open facebook.com/groups/feed first, then reopen FAP.
Some groups hold new posts for admin review. FAP's pending detection logs these automatically. Remove those groups from your campaign list and post to them less often.
This can happen when Facebook changes its page layout during a run. Update FAP to the latest version (see Updating FAP above). If it keeps happening, run fewer groups per session and report it to support.
Activation needs two things: the PayPal transaction ID from your receipt and your Installation ID from the FAP panel. Open the activation page, check both for typos or extra spaces, and try again. If PayPal is still processing, wait a minute. Still stuck? Email support@tigerzplace.com with the transaction ID.
The update was probably unzipped into a new folder, which gives FAP a new Installation ID. Load FAP from the original folder again, or contact support to move your license to the new Installation ID.
FAP could not find the post box on Facebook, usually after a Facebook layout change. Check the FAP panel for an update notice; we release fixes for Facebook changes as quickly as we can.

Changelog

v2.2.0 Current
  • Added Pending Post Detection: skips groups that send posts to pending review
  • Added Last Visited Tracking: timestamp per group for spacing out repeat posts
  • Group thumbnails now shown in the group selector for easier identification
  • Stability improvements and updates for Facebook's latest layout
v2.1.0 Previous
  • Campaign Saver: save and reload complete campaign configurations
  • Live progress bar with per-group status indicators
  • Post variation rotation
  • Initial license system integration
v2.0.0 Legacy
  • Full rewrite: Manifest V3 compliant
  • New dark-themed panel UI
  • Freemium tier introduced
License & Billing

License Management

Choose a plan on the Checkout page and pay with PayPal. PayPal sends you back to the activation page, which confirms the payment and switches the license on. The first time, enter your Installation ID (the 32-letter browser extension identifier shown in the FAP panel). If PayPal does not send you back, open the activation page and paste the transaction ID from your PayPal receipt.
One license is tied to one Installation ID, which means one installed copy of FAP in one browser profile at a time. To move to a new computer or browser profile, email support@tigerzplace.com with your PayPal transaction ID and the new Installation ID, and we will move it.
Both are one-time PayPal payments. Monthly adds 30 days to your license and annual adds 365 days, for a lower total price. You choose the duration inside the PayPal form.
There is nothing to cancel. Every payment is one-time and nothing is charged again automatically. Your license simply ends on its expiry date unless you buy again.
Email support@tigerzplace.com within 7 days of purchase with your PayPal transaction ID. An approved refund is paid back to the original payment method and the days that payment added are removed from your license.
Open the activation page and enter the transaction ID from your PayPal receipt. If PayPal is still processing the payment, wait a minute and try again. Still stuck? Email support@tigerzplace.com with the transaction ID.
Account

Account & Dashboard

Go to tools.tigerzplace.com/login and use the email or username and password you registered with. Your email address must be verified first; if the verification email did not arrive, use the resend option on the login page.
In your dashboard, or with the download button on the FAP page. Both link to the current release ZIP. See Installation and Updating FAP above for the steps.
On the login page, click Forgot Password. Enter your registered email and check your inbox and spam folder for the reset link.
Email support@tigerzplace.com from your current address with your new email and a PayPal transaction ID from one of your purchases, if you have one. We will update it and you will verify the new address.
Support

Still Need Help?

Can't find what you're looking for? Our support team typically responds within 24 hours.

Contact Support FAP FAQ